Air Conditioning Pumps

  • You've just added this product to the cart:

    KOOLAIR SEAWATER PUMP SPM1000 115V 5012087A

    Hot
    0 out of 5

    KOOLAIR SEAWATER PUMP SPM1000 115V 5012087A

    The Koolair SPM1000-115V is a magnetically driven, fully submersible marine HVAC coolant pump that circulates seawater. The pump is epoxy encapsulated, which allows the SPM-1000 to run fully submerged in many liquids or in open air for complete moisture protection. Most commonly used on your boat for marine air conditioning while circulating seawater. The hardened Carbon bushing allows for extended run dry time without any damage to the pump head. SPM1000 is 115 Volt. 1 Phase. The cord is 56” in length and are U.L. LISTED 18/3 wire. The motors are rated as continuous duty.

    • To withstand thermal overloads without failure, the pump has run dry protection. Finally, when cooled, the pump will resume operating normally.
    • Polypropylene, Buna N and Ceramic Magnet make up the wet end materials exposed to liquids. When submerged, Epoxy, Stainless Steel, Polysulfone, and also the Cord will come in contact with the solution.
    • The inlet connection is a ¾” female pipe thread and the outlet is ½” male pipe thread.
    • Includes fully integrated, heavy duty marine base and also the original base in contrast to other pumps.
    • The motor is a 1 Phase 230V, 1/8 Horsepower motor, running on either 50 or 60 HZ. The pump is not self-priming and requires flooded suction.
    • Maximum internal pressure is 25 PSI and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius.
    • The magnetically driven SPM1000-115 volt pump with no shaft seal is our core model. In open air or furthermore, fully submerged, the PM500 pumps as a result offer complete moisture protection due to being epoxy coated. When re-assembling the pump for service also make sure all “O” Rings are properly seated.
    • ISO 8846 Marine Ignition Protection.
    • NMMA, USCG and SAE J1171:2016
    $588.00
  • You've just added this product to the cart:

    KOOLAIR SEAWATER PUMP SPM1000 230V 5012088A

    Hot
    0 out of 5

    KOOLAIR SEAWATER PUMP SPM1000 230V 5012088A

    The Koolair SPM1000-115V is a magnetically driven, fully submersible marine HVAC coolant pump that circulates seawater. The pump is epoxy encapsulated, which allows the SPM-1000 to run fully submerged in many liquids or in open air for complete moisture protection. Most commonly used on your boat for marine air conditioning while circulating seawater. The hardened Carbon bushing allows for extended run dry time without any damage to the pump head. SPM1000 is 115 Volt. 1 Phase. The cord is 56” in length and are U.L. LISTED 18/3 wire. The motors are rated as continuous duty.

    • To withstand thermal overloads without failure, the pump has run dry protection. Finally, when cooled, the pump will resume operating normally.
    • Polypropylene, Buna N and Ceramic Magnet make up the wet end materials exposed to liquids. When submerged, Epoxy, Stainless Steel, Polysulfone, and also the Cord will come in contact with the solution.
    • The inlet connection is a ¾” female pipe thread and the outlet is ½” male pipe thread.
    • Includes fully integrated, heavy duty marine base and also the original base in contrast to other pumps.
    • The motor is a 1 Phase 230V, 1/8 Horsepower motor, running on either 50 or 60 HZ. The pump is not self-priming and requires flooded suction.
    • Maximum internal pressure is 25 PSI and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius.
    • The magnetically driven SPM1000-115 volt pump with no shaft seal is our core model. In open air or furthermore, fully submerged, the PM500 pumps as a result offer complete moisture protection due to being epoxy coated. When re-assembling the pump for service also make sure all “O” Rings are properly seated.
    • ISO 8846 Marine Ignition Protection.
    • NMMA, USCG and SAE J1171:2016
    $588.00
  • You've just added this product to the cart:

    WEBASTO PUMP SEAWATER MARCO UP1 12V 9.2GPM

    Hot
    0 out of 5

    WEBASTO PUMP SEAWATER MARCO UP1 12V 9.2GPM

    • Suction and Discharge: 3/4″ NPT x 3/4″ NPT
    • Materials of Construction: 316 stainless steel
    • Flow: Up to 21 GPM
    • Head Feet: Up to 23′
    • Impeller: 316 stainless steel semi-open
    • Motor:  ISO 8846 motor available
    • Drive Options
      • Close coupled 115V AC
      • Close coupled 12V DC
      • Close coupled 230V AC
      • Close coupled 24V DC
    • Seal
      • Special seals upon request
      • Standard – carbon / ceramic / Viton
    $260.90
  • You've just added this product to the cart:

    WEBASTO PUMP SEAWATER MP FMX-75 115V ISO 8846 5012106A

    Hot
    0 out of 5

    WEBASTO PUMP SEAWATER MP FMX-75 115V ISO 8846 5012106A

    • Suction and Discharge: 3/4″ NPT x 3/4″ NPT
    • Materials of Construction: 316 stainless steel
    • Flow: Up to 21 GPM
    • Head Feet: Up to 23′
    • Impeller: 316 stainless steel semi-open
    • Motor:  ISO 8846 motor available
    • Drive Options
      • Close coupled 115V AC
      • Close coupled 12V DC
      • Close coupled 230V AC
      • Close coupled 24V DC
    • Seal
      • Special seals upon request
      • Standard – carbon / ceramic / Viton
    $799.99
  • You've just added this product to the cart:

    WEBASTO PUMP SEAWATER PUMP MP FMX-75 230V ISO 8846 5012107A

    Hot
    0 out of 5

    WEBASTO PUMP SEAWATER PUMP MP FMX-75 230V ISO 8846 5012107A

    • Suction and Discharge: 3/4″ NPT x 3/4″ NPT
    • Materials of Construction: 316 stainless steel
    • Flow: Up to 21 GPM
    • Head Feet: Up to 23′
    • Impeller: 316 stainless steel semi-open
    • Motor:  ISO 8846 motor available
    • Drive Options
      • Close coupled 115V AC
      • Close coupled 12V DC
      • Close coupled 230V AC
      • Close coupled 24V DC
    • Seal
      • Special seals upon request
      • Standard – carbon / ceramic / Viton
    $617.50
× Chat With Us