Pumps

  • You've just added this product to the cart:

    JOHNSON PUMP 500 GPH BILGE PUMP 3/4" HOSE 12V DURA PORTS

    Hot
    0 out of 5

    JOHNSON PUMP 500 GPH BILGE PUMP 3/4″ HOSE 12V DURA PORTS

    Gallons Per Hour
    500 GPH
    Operation
    Non-Automatic
    Outlet Size
    3/4″
    Volts
    12v
    Type
    Electric
    Categories v2
    Marine Plumbing & Ventilation | Bilge Pumps
    Category v1
    MARINE PLUMBING SYSTEMS
    UPC
    729321325035
    Website
    Tech Phone
    Box Dimensions
    1 qty   8 x 6 x 4 inches  0.80 pounds
    $34.09
  • You've just added this product to the cart:

    JOHNSON PUMP AQUA JET 5.2 GPH WASH DOWN/550 LIVE WELL KIT

    Hot
    0 out of 5

    JOHNSON PUMP AQUA JET 5.2 GPH WASH DOWN/550 LIVE WELL KIT

    Max PSI
    70
    Volts
    12v
    Categories v2
    Marine Plumbing & Ventilation | Washdown / Pressure Pumps
    Category v1
    MARINE PLUMBING SYSTEMS
    UPC
    729321646345
    Website
    Tech Phone
    Box Dimensions
    1 qty   19 x 11 x 8 inches  11.50 pounds
    $454.55
  • You've just added this product to the cart:

    JOHNSON PUMP AQUA JET 5.2 GPH WASHDOWN PUMP KIT W/HOSE - 12V

    Hot
    0 out of 5

    JOHNSON PUMP AQUA JET 5.2 GPH WASHDOWN PUMP KIT W/HOSE – 12V

    Gallons Per Minute
    5.2 GPM
    Max PSI
    70
    Volts
    12v
    Categories v2
    Marine Plumbing & Ventilation | Washdown / Pressure Pumps
    Category v1
    MARINE PLUMBING SYSTEMS
    UPC
    729321645348
    Website
    Tech Phone
    Box Dimensions
    1 qty   18 x 11 x 8 inches  10.40 pounds
    $340.91
  • You've just added this product to the cart:

    JOHNSON PUMP AQUAT™ CONVERSION KIT - 12V

    Hot
    0 out of 5

    JOHNSON PUMP AQUAT™ CONVERSION KIT – 12V

    Volts
    12v
    Type
    Misc
    Categories v2
    Marine Plumbing & Ventilation | Marine Sanitation
    Category v1
    MARINE PLUMBING SYSTEMS
    UPC
    7330717009977
    Website
    Tech Phone
    Box Dimensions
    1 qty   14 x 9 x 5 inches  3.00 pounds
    $322.73
  • You've just added this product to the cart:

    JOHNSON PUMP MACERATOR PUMP 12V

    Hot
    0 out of 5

    JOHNSON PUMP MACERATOR PUMP 12V

    Volts
    12v
    Outlet Size
    1″
    Inlet Size
    1-1/2″
    Gallons Per Minute
    10 GPM
    Type
    Waste Pumps
    Categories v2
    Marine Plumbing & Ventilation | Marine Sanitation
    Category v1
    MARINE PLUMBING SYSTEMS
    UPC
    729321453011
    Website
    Tech Phone
    Box Dimensions
    1 qty   11 x 6 x 4 inches  4.75 pounds
    $170.46
  • You've just added this product to the cart:

    JOHNSON PUMP VIKING UNIVERSAL MANUAL BILGE PUMP - 38MM

    Hot
    0 out of 5

    JOHNSON PUMP VIKING UNIVERSAL MANUAL BILGE PUMP – 38MM

    Specifications:
    Body and cover: Polypropylene plastic reinforced with 30% fiberglass
    Diaphragm and valves: Nitrile rubber
    Wetted parts: PP30GF, PA66 GF30, POM, stainless steel, nitrile rubber
    Maximum suction: 3M (10′)
    Maximum head: 4M (13′)
    Combined suction/head: 7M (23′)
    Connection: KlickTite? connectors 38mm (1-1/2″) hose. Both straight and 90° bends are included
    Max. liquid temp: +60°C (140°F)
    Weight: 1,5 kg (3.3 lbs)

    $147.73
  • You've just added this product to the cart:

    JOHNSON PUMP Y-VALVE

    Hot
    0 out of 5

    JOHNSON PUMP Y-VALVE

    Categories v2
    Marine Plumbing & Ventilation | Accessories
    Category v1
    MARINE PLUMBING SYSTEMS
    UPC
    7330717009953
    Website
    Tech Phone
    Box Dimensions
    1 qty   14 x 9 x 5 inches  3.00 pounds
    $100.00
  • You've just added this product to the cart:

    KOOLAIR SEAWATER PUMP SPM1000 115V 5012087A

    Hot
    0 out of 5

    KOOLAIR SEAWATER PUMP SPM1000 115V 5012087A

    The Koolair SPM1000-115V is a magnetically driven, fully submersible marine HVAC coolant pump that circulates seawater. The pump is epoxy encapsulated, which allows the SPM-1000 to run fully submerged in many liquids or in open air for complete moisture protection. Most commonly used on your boat for marine air conditioning while circulating seawater. The hardened Carbon bushing allows for extended run dry time without any damage to the pump head. SPM1000 is 115 Volt. 1 Phase. The cord is 56” in length and are U.L. LISTED 18/3 wire. The motors are rated as continuous duty.

    • To withstand thermal overloads without failure, the pump has run dry protection. Finally, when cooled, the pump will resume operating normally.
    • Polypropylene, Buna N and Ceramic Magnet make up the wet end materials exposed to liquids. When submerged, Epoxy, Stainless Steel, Polysulfone, and also the Cord will come in contact with the solution.
    • The inlet connection is a ¾” female pipe thread and the outlet is ½” male pipe thread.
    • Includes fully integrated, heavy duty marine base and also the original base in contrast to other pumps.
    • The motor is a 1 Phase 230V, 1/8 Horsepower motor, running on either 50 or 60 HZ. The pump is not self-priming and requires flooded suction.
    • Maximum internal pressure is 25 PSI and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius.
    • The magnetically driven SPM1000-115 volt pump with no shaft seal is our core model. In open air or furthermore, fully submerged, the PM500 pumps as a result offer complete moisture protection due to being epoxy coated. When re-assembling the pump for service also make sure all “O” Rings are properly seated.
    • ISO 8846 Marine Ignition Protection.
    • NMMA, USCG and SAE J1171:2016
    $588.00
  • You've just added this product to the cart:

    KOOLAIR SEAWATER PUMP SPM1000 230V 5012088A

    Hot
    0 out of 5

    KOOLAIR SEAWATER PUMP SPM1000 230V 5012088A

    The Koolair SPM1000-115V is a magnetically driven, fully submersible marine HVAC coolant pump that circulates seawater. The pump is epoxy encapsulated, which allows the SPM-1000 to run fully submerged in many liquids or in open air for complete moisture protection. Most commonly used on your boat for marine air conditioning while circulating seawater. The hardened Carbon bushing allows for extended run dry time without any damage to the pump head. SPM1000 is 115 Volt. 1 Phase. The cord is 56” in length and are U.L. LISTED 18/3 wire. The motors are rated as continuous duty.

    • To withstand thermal overloads without failure, the pump has run dry protection. Finally, when cooled, the pump will resume operating normally.
    • Polypropylene, Buna N and Ceramic Magnet make up the wet end materials exposed to liquids. When submerged, Epoxy, Stainless Steel, Polysulfone, and also the Cord will come in contact with the solution.
    • The inlet connection is a ¾” female pipe thread and the outlet is ½” male pipe thread.
    • Includes fully integrated, heavy duty marine base and also the original base in contrast to other pumps.
    • The motor is a 1 Phase 230V, 1/8 Horsepower motor, running on either 50 or 60 HZ. The pump is not self-priming and requires flooded suction.
    • Maximum internal pressure is 25 PSI and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius.
    • The magnetically driven SPM1000-115 volt pump with no shaft seal is our core model. In open air or furthermore, fully submerged, the PM500 pumps as a result offer complete moisture protection due to being epoxy coated. When re-assembling the pump for service also make sure all “O” Rings are properly seated.
    • ISO 8846 Marine Ignition Protection.
    • NMMA, USCG and SAE J1171:2016
    $588.00
  • You've just added this product to the cart:

    WEBASTO PUMP SEAWATER MARCO UP1 12V 9.2GPM

    Hot
    0 out of 5

    WEBASTO PUMP SEAWATER MARCO UP1 12V 9.2GPM

    • Suction and Discharge: 3/4″ NPT x 3/4″ NPT
    • Materials of Construction: 316 stainless steel
    • Flow: Up to 21 GPM
    • Head Feet: Up to 23′
    • Impeller: 316 stainless steel semi-open
    • Motor:  ISO 8846 motor available
    • Drive Options
      • Close coupled 115V AC
      • Close coupled 12V DC
      • Close coupled 230V AC
      • Close coupled 24V DC
    • Seal
      • Special seals upon request
      • Standard – carbon / ceramic / Viton
    $260.90