Our framed watermaker systems are designed for those customers that want an easier installation and have sufficient space to fit the entire system into a single location. Three different options are all powered by AC electric and have outputs between 100 and 240 litres per hour (26 to 63 gallons per hour).
Although the systems look different than other Rainman watermakers, internally, they are similar. The framed systems utilise the design simplicity found in all Rainman systems. A single motor with a through shaft to drive both the lift pump and high pressure pump. Employing the same control panel and autoflush that are optional on our modular systems, the operation of the system is the same as any other installed Rainman unit.
Our framed systems were created to either be plumbed into your boat or used for land based applications.
***Our systems are shipped from Sydney, Australia. Note that Rainman framed systems are packed in a single large crate so shipping cost is higher and will be quoted upon request. ***
Frame AC 240L Torrent |
Frame AC 140L |
Frame AC 100L |
|
---|---|---|---|
Output Expectations | 180 – 240 lph 48 – 63 gph |
100 – 140 lph 26 – 37 gph |
75 – 100 lph 20 – 27 gph |
Configuration | |||
Enclosure | Powdercoated aluminium frame | Powdercoated aluminium frame | Powdercoated aluminium frame |
Pressure Supply Unit (PSU) | Internal to frame | Internal to frame | Internal to frame |
RO Membranes | Three 2.5″ x 40″ seawater membranes | Two 2.5″ x 40″ seawater membranes | Three 2.5″ x 21″ seawater membranes |
Reverse Osmosis Unit (RO) | Rear mount, top mount, or remote | Rear mount, top mount, or remote | Rear mount, top mount, or remote |
High Pressure Pump | General Pump EWM triplex plunger pump | General Pump / Rainman WMR triplex plunger pump | General Pump / Rainman WMR triplex plunger pump |
Operating Pressure | 55 bar (800 psi) in seawater | 55 bar (800 psi) in seawater | 55 bar (800 psi) in seawater |
Pressure Relief Valve | General Pump 316SS/ceramic | Integrated General Pump 316SS | Integrated General Pump 316SS |
Prefilter | 20 micron and 5 micron | 20 micron and 5 micron | 20 micron and 5 micron |
Lift Pump | Integrated SPX Johnson F5B-8 bronze flexible impeller | Integrated Rainman bronze flexible impeller | Integrated Rainman bronze flexible impeller |
Vertical Water Lift | 2 metres (6 ft) | 2 metres (6 ft) | 2 metres (6 ft) |
Option Compatibility | |||
Control Panel | Included / integrated | Included / integrated | Included / integrated |
Autoflush | Included / integrated | Included / integrated | Included / integrated |
Power | |||
Power Source | 115VAC/230VAC 50Hz/60Hz configurable |
230VAC / 50Hz or 115VAC / 60Hz |
230VAC / 50Hz or 115VAC / 60Hz |
Power Use | 2,450 Watts @50Hz 2,800 Watts @60Hz |
1,250 Watts | 1,250 Watts |
Current Draw | 11 Amps @230VAC 22 Amps @115VAC |
6 Amps @230VAC 12 Amps @115VAC |
6 Amps @230VAC 12 Amps @115VAC |
Motor Type | 2.2 / 2.5 HP NEMA | 1.5HP TEFC induction | 1.5HP TEFC induction |
Plug Type | Hard wired | USA – NEMA 5-15 Europe – CEE 7/7 Australia – AS/NZS 3112 UK – BS 1363 |
USA – NEMA 5-15 Europe – CEE 7/7 Australia – AS/NZS 3112 UK – BS 1363 |
Power Cord Length | None provided Recommend 4mm² |
3 metres (10 ft) 230VAC – 10A cable (1.5mm²) 115VAC – 15A cable (2.08mm²) |
3 metres (10 ft) 230VAC – 10A cable (1.5mm²) 115VAC – 15A cable (2.08mm²) |
Sound Level | |||
Subjective Sound Level | Loud hum | Loud hum | Loud hum |
Measured Sound Level 6 metres in open lot |
64dB | 62dB | 62dB |
Inclusions | |||
HP Hose | N/A – internal to frame | N/A – internal to frame | N/A – internal to frame |
Product Water Hose | LDPE food grade product water hose 18 metres (60 ft) total for divert and tank, cut to size (10mm OD) |
LDPE food grade product water hose 18 metres (60 ft) total for divert and tank, cut to size (8mm OD) |
LDPE food grade product water hose 18 metres (60 ft) total for divert and tank, cut to size (8mm OD) |
Brine Waste Hose | 6 metres (20 ft), cut to size (1/2″ ID) | 6 metres (20 ft), cut to size (10mm OD) | 6 metres (20 ft), cut to size (10mm OD) |
Intake Hose | 5 metres (16 ft), cut to length (3/4″ ID) | 5 metres (16 ft), cut to length (1/2″ ID) | 5 metres (16 ft), cut to length (1/2″ ID) |
Impeller | Included in pump (replacement Johnson 09-1027B-1) |
Included in pump (replacement Rainman MI813 or Jabsco Profile D 22405-0001-P) |
Included in pump (replacement Rainman MI813 or Jabsco Profile D 22405-0001-P) |
5 Micron Prefilter | 1 in housing + 4 spares 10″ x 2.5″ pleated poly |
1 in housing + 4 spares 10″ x 2.5″ pleated poly |
1 in housing + 4 spares 10″ x 2.5″ pleated poly |
20 Micron Prefilter | 1 in housing + 4 spares 10″ x 2.5″ pleated poly |
1 in housing + 4 spares 10″ x 2.5″ pleated poly |
1 in housing + 4 spares 10″ x 2.5″ pleated poly |
Activated Carbon Filter | 1 in housing + 1 spare 10″ x 2.5″ |
1 in housing + 1 spare 10″ x 2.5″ |
1 in housing + 1 spare 10″ x 2.5″ |
Pickle Solution | 1 kg (2.2 lb) sodium metabisulfate powder | 1 kg (2.2 lb) sodium metabisulfate powder | 1 kg (2.2 lb) sodium metabisulfate powder |
Valve / Gauge Control | Integrated in control panel | Integrated in control panel | Integrated in control panel |
Low Pressure Gauge | Integrated in control panel | Integrated in control panel | Integrated in control panel |
Salinity Sensor | Tri-colour water quality indicator LED in control panel | Tri-colour water quality indicator LED in control panel | Tri-colour water quality indicator LED in control panel |
Product Water Flow Meter | Acrylic plastic analogue flow metre – 350lph/90gph | Acrylic plastic analogue flow metre – 160lph/42gph | Acrylic plastic analogue flow metre – 160lph/42gph |
Plumbing Installation Kit | Included | Included | Included |
Dimensions | |||
RO Mounted on Rear of Frame | 1,170 x 380 x 480mm (46.0 x 15.0 x 18.9″) |
1,170 x 380 x 487mm (46.0 x 15.0 x 19.2″) |
815 x 380 x 480mm (32.1 x 15.0 x 18.9″) |
RO Mounted on Top of Frame | 1,170 x 485 x 375mm (46.0 x 19.1 x 14.8″) |
1,170 x 492 x 375mm (46.0 x 19.4 x 14.8″) |
815 x 485 x 375mm (32.1 x 19.1 x 14.8″) |
Frame Separated from RO Unit | 815 x 380 x 375mm (32.1 x 15.0 x 14.8″) |
815 x 380 x 375mm (32.1 x 15.0 x 14.8″) |
815 x 380 x 375mm (32.1 x 15.0 x 14.8″) |
RO Unit | 1,170 x 325 x 106mm (46.0 x 12.8 x 4.2″) |
1,170 x 220 x 120mm (46.0 x 8.7 x 4.7″) |
815 x 325 x 106mm (32.1 x 12.8 x 4.2″) |
Pressure Supply Unit (Modular) | Incorporated in frame | Incorporated in frame | Incorporated in frame |
Control Panel | Incorporated in frame | Incorporated in frame | Incorporated in frame |