Air Handlers

  • You've just added this product to the cart:

    Webasto Blue Cool A-Series Compact Air Handler 230V- 50/Hz

    Hot
    0 out of 5

    Webasto Blue Cool A-Series Compact Air Handler 230V- 50/Hz

    The central chiller unit is typically installed in the engine room, providing chilled water/glycol to all cabins via a water circuit. One or more air handler(s) in each cabin are fitted to generate the required cooling capacities individually in each room.

    The Webasto A-Series meets the highest demands for comfort thanks to innovative features, such as vibration dampers, remote bleeder and the innovative Instant Drain Condensate Management System for smart management of condensate. The modular concept of the BlueCool A-series provides maximum flexibility and can easily be extended with accessory components such as the new Electric Heat Module (EHM) and the Flow Control Valve.

    Key Features

    • New modular system with various options
    • Innovative Webasto Instant Drain Condensate Management
    • High quality stainless steel design
    • High performance with high cooling capacity and high air flow
    • Super Silent with flexible vibration isolation mounts & larger ducts to reduce noise from air speed
    • Oversized heat exchanger tested under tropical conditions
    $789.99$2,189.99
  • You've just added this product to the cart:

    Webasto Blue Cool A-Series Electric Heat Module 230V

    Hot
    0 out of 5

    Webasto Blue Cool A-Series Electric Heat Module 230V

    Key Features

    • Electric heat modules ensure cabin heating independent of chiller operation
    • Heat Modules are easily installed in-line into air duct of the A-Series air handlers
    • EHM is directly connected to A-Series electronics so no separate controls are needed
    • EHM further increases the comfort on board by:
    • – Enabling heating in selective cabins while chiller is in cooling mode
    • – Enables heating while chiller is switched off
    • – Increasing the heat output of air handlers if extra high heat demand is needed
    • EHM can easily be retrofitted to existing A-Series
    • EHM is preinsulated to prevent condensation on the outside. It also comes with 2 stainless steel mounting brackets for wall mounting
    • When using EHM a flow control valve also needs to be fitted

    Part Number: WBCL1209100

    $589.99$839.99
  • You've just added this product to the cart:

    Webasto Blue Cool A-Series Low Profile Air Handler 230V- 50/60 Hz

    Hot
    0 out of 5

    Webasto Blue Cool A-Series Low Profile Air Handler 230V- 50/60 Hz

    The central chiller unit is typically installed in the engine room, providing chilled water/glycol to all cabins via a water circuit. One or more air handler(s) in each cabin are fitted to generate the required cooling capacities individually in each room.

    The Webasto A-Series meets the highest demands for comfort thanks to innovative features, such as vibration dampers, remote bleeder and the innovative Instant Drain Condensate Management System for smart management of condensate. The modular concept of the BlueCool A-series provides maximum flexibility and can easily be extended with accessory components such as the new Electric Heat Module (EHM) and the Flow Control Valve.

    Key Features

    • New modular system with various options
    • Innovative Webasto Instant Drain Condensate Management
    • High quality stainless steel design
    • High performance with high cooling capacity and high air flow
    • Super Silent with flexible vibration isolation mounts & larger ducts to reduce noise from air speed
    • Oversized heat exchanger tested under tropical conditions
    $1,090.00$1,539.99
  • You've just added this product to the cart:

    Webasto Blue Cool A-Series Slimline Air Handler 230V 50/60 Hz

    Hot
    0 out of 5

    Webasto Blue Cool A-Series Slimline Air Handler 230V 50/60 Hz

    The central chiller unit is typically installed in the engine room, providing chilled water/glycol to all cabins via a water circuit. One or more air handler(s) in each cabin are fitted to generate the required cooling capacities individually in each room.

    The Webasto A-Series meets the highest demands for comfort thanks to innovative features, such as vibration dampers, remote bleeder and the innovative Instant Drain Condensate Management System for smart management of condensate. The modular concept of the BlueCool A-series provides maximum flexibility and can easily be extended with accessory components such as the new Electric Heat Module (EHM) and the Flow Control Valve.

    Key Features

    • New modular system with various options
    • Innovative Webasto Instant Drain Condensate Management
    • High quality stainless steel design
    • High performance with high cooling capacity and high air flow
    • Super Silent with flexible vibration isolation mounts & larger ducts to reduce noise from air speed
    • Oversized heat exchanger tested under tropical conditions
    $1,089.99$1,589.99
  • You've just added this product to the cart:

    Webasto BlueCool A-Series

    0 out of 5

    Webasto BlueCool A-Series

    Webasto provides an extensive air handler portfolio in different layouts with a performance range from 4,000 – 36,000 BTU/h to suit all sizes

    $1,420.99
  • You've just added this product to the cart:

    Webasto Flow Control Valve For Compact A-Series Air Handlers

    Hot
    0 out of 5

    Webasto Flow Control Valve For Compact A-Series Air Handlers

    Key Features

    • The flow control valve acts as a 3/2-way valve allowing the chilled water to bypass the heat exchanger of the A-Series when needed
    • Easy screw connection to all A-Series units, no soldering needed
    • Easy electrical connection to A-Series electronics
    • 90° elbows in the Slimline/ Low profile kit enable an extra flat installation
    • The flow control further increases the comfort on board by:
    • – Directing the chilled water only to those cabins with cooling/heating demand
    • – Prevent inadvertent heating when air handler is switched off – no chimney effect
    • – Prevents condensate build-up and thus mold on heat exchangers of air handlers which are switched off
    • – Continuous blower operation is possible thus reducing noise variations in cabins
    • Super silent with flexible vibration isolation mounts & larger ducts to reduce noise from air speed
    • Oversized heat exchanger tested under tropical conditions
    $309.99
  • You've just added this product to the cart:

    Webasto Flow Control Valve For Slimline/ Low Profile A-Series Air Handlers with 90° Elbow

    Hot
    0 out of 5

    Webasto Flow Control Valve For Slimline/ Low Profile A-Series Air Handlers with 90° Elbow

    Key Features

    • The flow control valve acts as a 3/2-way valve allowing the chilled water to bypass the heat exchanger of the A-Series when needed
    • Easy screw connection to all A-Series units, no soldering needed
    • Easy electrical connection to A-Series electronics
    • 90° elbows in the Slimline/ Low profile kit enable an extra flat installation
    • The flow control further increases the comfort on board by:
    • – Directing the chilled water only to those cabins with cooling/heating demand
    • – Prevent inadvertent heating when air handler is switched off – no chimney effect
    • – Prevents condensate build-up and thus mold on heat exchangers of air handlers which are switched off
    • – Continuous blower operation is possible thus reducing noise variations in cabins
    • Super silent with flexible vibration isolation mounts & larger ducts to reduce noise from air speed
    • Oversized heat exchanger tested under tropical conditions
    $339.99
× Chat With Us